Automatic Injection Moulding Machine For Making Baby Bottle
LSR is a two-component liquid material, which is divided into A-component and B-component. The mixer works to fully mix A-component and B-component in an accurate ratio of 1:1. And because part of the products are colored design, so equipped with color pump set and color measurement part. A + B components, additives, colors, etc. are fully mixed before entering the plasticizing system.
The plasticizing screw has the function of homogenization and mixing at the same time. The mixture is injected into the hot mold through the screw. At the mold temperature of 170-200 ℃, the silica gel takes place curing reaction. When using a cold runner system, it is important to note that the runner is cold enough. In order to avoid leakage of glue, the needle valve is installed on the surface of the mold part. When the glue injection is completed, the needle valve immediately closes the nozzle.
Machine Model Parameter
| Machine Model | Shot Volume | Injection Rate | Injection Pressure | Clamping Force | Opening Stroke | Tie-Bars Force | Ejection Force | Ejection Stroke | Pump Pressure | Machine Weight | Motor Power | Machine Dimension |
| TYM-W4545 | 148g | 30g/s | 700kg/cm2 | 130T | 200-700mm | 450*450mm | 4.3T | 150mm | 21Mpa | 5.2T | 12.1KW | 4.0*1.2*1.9m |
| TYM-W5050 | 270g | 30g/s | 700kg/cm2 | 150T | 200-700mm | 500*500mm | 4.3T | 150mm | 21Mpa | 5.3T | 12.1KW | 4.2*1.4*1.9m |
| TYM-W5555 | 270g | 30g/s | 700kg/cm2 | 160T | 200-700mm | 550*550mm | 4.3T | 150mm | 21Mpa | 5.6T | 12.1KW | 4.5*1.6*2.0m
|
Liquid silica gel is a kind of environmental protection material, because of its superior performance, it has been favored, accepted and widely used by various industries, and produced a variety of unique products. So far, the common forming processes of organosilicon products are as follows:
Extrusion process: like toothpaste, the product has been vulcanized into strips under the action of force and temperature, and the product parts can be different, such as rectangle, ring, etc.
Two epoxy resin molding processes: the raw material for this process is liquid silica gel, which is installed in the syringe like device. Through pneumatic and manual operation, the raw materials are dropped on the mould, then heated and vulcanized, which belongs to manual processing with low productivity. The advantage is that the product can fall into various colors according to the requirements of customers, such as multi-color silica gel bracelet, silica gel mobile phone shell with various colors and patterns.
Three solid hot pressing process: this process uses the temperature and pressure of the hydraulic press to vulcanize the raw materials used in the products through the mold, and has relatively low cost and high output. This is a widely used process.
Four liquid injection process: the process needs to be equipped with silicone injection machine and press. The required raw materials are thick and divided into two groups. The working principle is to press two groups of raw materials into the barrel of the injection molding machine with a presser foot 1:1. Then, the mixed raw material is pressed into the cavity of the hot die through the nozzle. The molding temperature of the process is low (130 ℃), the output is high, and it is easy to automatic production, but the cost of raw material is several times higher than that of general solid silica.
TYM SERVICE
| Pre -sale service | * Provide investment budget and plant planning;
* Provide a whole set of solutions about machine and mold according to products that customers offered. |
| On-sales service | * Provide installation and new machine debugging services for users who purchase Tianyuan machine. *Free tranning for your staff who can operate and maintain the machine independently in your factory. |
| After-sales service | * Timely dispatch personnel to the user's site to solve after-sales problems and solve difficult technical problems;
* After product upgrading, the upgrading work of previous users shall be given priority as required;
|
Product Tags:
|
|
Big Automated Injection Molding Machine For Making Baby Bottle Feeding Products Images
|
