Liquid Silicone Rubber Injection Molding
Machine Model Parameter
| TYM-L5058 Vertical LSR injection molding machine | | Injection Unit | | Shot Volume | 165 g | | Injection Rate | 30 g/s | | Injection Pressure | 19.6 T | | Clamping Unit | | Clamping Force | 130 T | | Opening Stroke | 250-550 mm | | Tie-Bars Pace | 500*580 mm | | Ejection Force | 7.8 T | | Ejection Stroke | 150 mm | | Others | | Pump Pressure | 21 Mpa | | Motor Power | 12.1 KW | | Heater Power | 9 KW | | Mould Orientation Ring Diameter | Φ 100 mm | | Machine Weight | 6 T | | Machine Dimension | 2.5*1.6*3.6 m | |
1. Silica gel half old: the mold is made of ordinary flow channel, one out one, mold core ejection, manual blowing and strong stripping products, with a production efficiency of 60 seconds / mold. The mold processing technology is relatively simple, and the dimensional accuracy can be achieved.
2. Liquid silica gel coated plastic half mold: common flow channel, one out, manual insert placement, mold core ejection, manual air blowing strong stripping products, production efficiency of 90 seconds / mold, mold processing technology is relatively complex, cylinder and oil cylinder control position, to avoid overflow and indentation, to consider the size control of plastic parts, high temperature resistance, bonding with liquid silica gel, size accuracy Higher requirements.
3. Liquid silica gel overall cover mold: the mold is made of ordinary flow channel, one out one, mold core ejection, manual blowing and strong stripping products, with a production efficiency of 60 seconds / mold. The mold processing technology is relatively simple, and the dimensional accuracy can be achieved.
Product Tags:
|
|
Protective Liquid Silicone Rubber Injection Moulding Opening Stroke 250-550 mm Images
|
